- driver_feedback_sign_dfs0160 Objects| |SELECT":id", -- Socrata column ID"maximum_speed_for_bin_number", -- The fastest detected speed travelled that corresponds to the Bin Number. Vehicles can travel less than or equal to this speed for it to be recorded for the Bin. NOTE: For Bin 10, the maximum detectable speed is approximately 225 KPH."minimum_speed_for_bin_number", -- The slowest detected speed travelled that corresponds to the Bin Number. Vehicles can travel equal to or faster than this speed for it to be recorded for the Bin. NOTE: For Bin 1, the minimum detectable speed is approximately 6 KPH."log_timestamp", -- The Timestamp of when the data was recorded. The time interval between recordings is 15 minutes. Note: It is possible to not have a specific recording of data at a specific Timestamp. This can occur for a number of reasons; however, the data values are still for the 15 minute interval."row_id", -- System generated ID to eliminate the possibility of duplicate data."location_description", -- A brief / abbreviated description of the location where the DFS unit is located."vehicle_count_for_log_interval", -- The number of vehicles that were successfully detected and recorded within the specified parameters. This Vehicle Count is not and should not be correlated to a traffic volume count within the 15 minute interval."bin_number", -- A value between 1 and 10, representing the data bin for which the vehicle count and the speed range is applicable. Bin 1 records the number of vehicles that were detected to travel in the slowest speed range and Bin 10 would be for the fastest speed range."direction", -- The direction of travel of vehicles that are being detected by the DFS unit."site_id", -- A unique ID assigned to the location for proper/accurate identification."speed_range_for_bin", -- A calculated value based on (Maximum Speed Detection Setting and Minimum Speed Detection Setting). NOTE: - For Bin 1, the minimum detectable speed is approximately 6 KPH. - For Bin 10, the maximum detectable speed is approximately 225 KPH."vehicle_count_at_highest_speed_detected", -- The number of vehicles counted in the 15 minute time interval where the detected fastest speed of the vehicle was equal to or greater than the Minimum Speed for the Bin and is less than or equal to the Maximum Speed for the Bin."vehicle_count_at_slowest_speed_detected", -- The number of vehicles counted in the 15 minute time interval where the detected slowest speed of the vehicle was equal to or greater than the Minimum Speed for the Bin and is less than or equal to the Maximum Speed for the Bin."speed_unit_of_measure", -- The Speed Unit of Measure. Note: The usual setting is KPH but could also be MPH."bin_over_speed_limit_flag", -- A flag value that indicates the following: 0 - if the both the Minimum Speed and Maximum Speed for the Bin are below the Speed Limit 1 - if the Speed Limit is between the Minimum Speed and Maximum Speed for the Bin 2 - if the value of both the Minimum Speed and Maximum Speed for the Bin are greater than the Speed Limit"maximum_speed_detection_setting", -- The fastest speed setting for the DFS Unit used to determine the speed ranges for each Bin."minimum_speed_detection_setting", -- The lowest speed setting for the DFS Unit used to determine the speed ranges for each Bin."speed_limit" -- The Speed Limit setting for the DFS unit. Note: This may not be the enforceable speed for the roadway.Failed
Error: TypeError: Failed to fetch
Splitgraph has been acquired by EDB!